What Should The String Height Be On An Acoustic Guitar. These are not the only acceptable string heights. but they are a starting point. as the happy medium all comes down to your own personal preference. The low e string has an 8mm diameter.
How Much Does It Cost to Restring a Guitar? INSTRUMENTIO from instrumentio.com
The most commonly used string heights are 3/64” and 4/64”. The lower the strings. the less tension they will have and the easier it will be. String height on a gibson acoustic guitar should be 4/64 at trebile side and 6/64 at the bass side measured at the 12th fret when set at the gibson factory.
Source: acousticguitar.com
At the 12th fret. aim for about 2.38mm at the sixth string (thickest). and about 1.59mm at the first string (thinnest). Depending the abilities of the instrument and the needs of.
Source: acousticguitar.com
At the very least i think ill be shaving the saddle to get the height to 3/32 or just a smidge under if i can. Next. i will take a measurement using the string action gauge.
guitaranswerguy.com
The higher the strings. the more tension they have. and the harder it will be to fret the notes. The martin guitar factory considers a low ‘e’ bass string to be within specification if the distance from the 12th fret to the bottom of the low e string is between 2.38 mm (3/32″) minimum. to 2.78 mm (7/64″) maximum.
sweetwater.com
Measure the 1st string gap in the same fashion; At the 12th fret. aim for about 2.38mm at the sixth string (thickest). and about 1.59mm at the first string (thinnest).
youtube.com
The average string action of the guitars i set up is 3/32 inches on the bass side and 1/16 inches on the treble side. The low e string has an 8mm diameter.
stuartbriggs.co.uk
When i am certain of the condition of the frets i. Next. i will take a measurement using the string action gauge.
You’re Probably Now Wondering What Your String Height Should Be Then. In Order To Get The Best Of Both Worlds.
At the very least i think ill be shaving the saddle to get the height to 3/32 or just a smidge under if i can. The martin guitar factory considers a low ‘e’ bass string to be within specification if the distance from the 12th fret to the bottom of the low e string is between 2.38 mm (3/32″) minimum. to 2.78 mm (7/64″) maximum. My string is hovering just below the line in the image above. which puts the action at about 1.9mm.
Measure At The 12Th Fret From A Seated Position.
Depending the abilities of the instrument and the needs of. At the 12th fret. aim for about 2.38mm at the sixth string (thickest). and about 1.59mm at the first string (thinnest). For electric guitars. in our opinion. a good default string height at the 12th fret is typically about 6/64th of an inch (2.38mm) on the bass side and 4/64th of an inch (1.59mm) on the treble side.
For Acoustic Guitars. We’ll Want To Go Just A Bit Higher Than This:
In fact. this distance is so small. that it can be barely seen. but has a big impact on the overall playability and how your guitar sounds. The high ‘e’ treble string should measure between 1.59 mm (1/16″) and 1.98 mm (5/64″) at the maximum. With that. here are some defaults to aim for:
The Most Commonly Used String Heights Are 3/64” And 4/64”.
Next. i will take a measurement using the string action gauge. Either there is too much neck relief.too much humidity for your guitar. someone filed the saddle wrong. Typically. acoustic guitars have an action of 7/64″ (2.8 mm) on the low e string. and 5/64″ (2 mm) on the high e string.
A Low Action Is When The Strings Are Very Close To The Frets (Compared To The Normal) And A High Action Means That The Strings Are Sitting High Above The Frets. Compared To Normal.
When i am certain of the condition of the frets i. This is on the high side. Again. using the feeler gauge. measure the gap between the top of the 1st fret and the bottom of the 6th string;