# How To Measure Wheel Offset On A Car

How To Measure Wheel Offset On A Car. A simple way to understand offset. is the lower the offset. the more the wheel will stick out. likewise. the higher the offset. the more the wheel will tuck in. Take the distance of the middle line away from the distance between the back edge and mounting face.

Tech How To Measure For Larger Wheels And Tires chevyhardcore.com

You have just measured the offset of your wheels. Lay a straightedge across the wheel and measure down to the mounting pad (you may have to deflate the tire to do this). So if you put a +15mm offset wheel on the car. the wheel is likely to stick out about 1 inch.

Source: carfromjapan.com

Now that you have a better. Remove the wheel and accurately measure the width.

efxtires.com

Place the hook of your measuring tape on the outside of a lip and pull it across to the opposite side. Take a wheel off your car and lay it on a flat surface with the back (the side that faces the brakes) facing up.

The number we got is 260 mm. Hub diameter or center bore is the hole at the center of the wheel.

Wheel terminology bolt pattern or lug pattern or bolt circle is determined by the number of bolt holes and the bolt circle diameter. You have just measured the offset of your wheels.

tasteslikepetrol.net

Wheel offset is measured in millimetres. which is a quirk in the system given that some measurements are in inches. and other millimetres. In other words. you need a rim’s total width to determine offset.

Source: bolt-pattern.com

This is a combination of the width and the offset of the wheel. Lay a straightedge across the wheel and measure down to the mounting pad (you may have to deflate the tire to do this).

#### This Is Your Rim’s Backspacing.

The number we got is 260 mm. Take a wheel off your car and lay it on a flat surface with the back (the side that faces the brakes) facing up. Noted that we used ruler with millimeter indicators.

#### A Measurement Of Zero Millimeters Of Wheel Offset Means That The Hub Inside The Wheel Sits Exactly In The Middle Of The Wheel.

Measured from the centerline of the wheel to the mounting surface backspacing: The more positive the offset. the more the wheel tucks into the wheel well. Measured from the outer edge of the back side of the wheel to the mounting surface lower backspacing (negative offset) = more wheel clearance on the inside

#### Wheel Offset Is Measured In Millimetres. Which Is A Quirk In The System Given That Some Measurements Are In Inches. And Other Millimetres.

Now that you have a better. (non mounted wheel preferred) 1. The distance from the centerline of the wheel to the.

#### This Distance Is Your Backspacing.

Place the hook of your measuring tape on the outside of a lip and pull it across to the opposite side. To make it easier to determine the wheel offset. convert the inch measurement to a millimetre measurement. Wheel offset works with the width of the wheel and is measured from the rims mounting surface to the rear of the rim.

#### Take The Distance Of The Middle Line Away From The Distance Between The Back Edge And Mounting Face.

Wheel terminology bolt pattern or lug pattern or bolt circle is determined by the number of bolt holes and the bolt circle diameter. Wheel offset is measured in millimeters. Here’s how to find out what offset you have on your wheel.