How To Clean Gauge Cluster Lens. Use a mini vacuum cleaner or a hand swifter to remove and dust and debris on the surface. You can clean the lens without completely disassembling it.
Competitive Price 100 11 2011 Ford E150 Speedometer from kc-poitras.com
You may have to register before you can post: My gauge cluster lens is all scratched to hell by the previous owner. To replace it you just replace it and use a good glue to anchor the posts.
Using compressed air now only. You can clean the instrument cluster as described:
Theres 8 torx screws around the cluster (should be brass color). 4 on the top of the cluster. and 4 on the bottom. You can use a dremel and remove some of it and then the lens can be carefully popped off.
The chrome ring is rolled over to hold the lens to the housing. My gauge cluster lens is all scratched to hell by the previous owner.
The chrome ring is rolled over to hold the lens to the housing. Apply a little pressure to remove smudges.
The best remedy of course is to not put scratches into plastic in these areas in the first place. You can clean all of the areas that show through the bezel.
Be careful with compressed air. However. the clear plastic is glued to the black surround and youd have to.
Theres 8 Torx Screws Around The Cluster (Should Be Brass Color). 4 On The Top Of The Cluster. And 4 On The Bottom.
If this is your first visit. be sure to check out the faq by clicking the link above. Using compressed air now only. My gauge cluster lens is all scratched to hell by the previous owner.
The Best Remedy Of Course Is To Not Put Scratches Into Plastic In These Areas In The First Place.
Click the register link above to proceed. The instrument cluster lens is an individual part and has a part # with a model dependence. I had to replace mine.
I Did This On A 2017 Tacoma And Wound Up With Dirt And Dust Getting Pushed Behind The Plexi. Into The Gauge Area.
Use a mini vacuum cleaner or a hand swifter to remove and dust and debris on the surface. Im not going to clutter this up with bezel/dash removal instructions. so if your not sure how to remove the gauge bezel in your year car search for it in the forums. Results 1 to 2 of 2.
1 Elbow Grease 1 Bottle Of Dreams (Mothers Powerball Aluminum Polish) 1 Micro Fiber Towel A Few Plackers (Sounds Stupid But They Remove Polish From The Tight Spaces)
*make sure you clean your l. On my 2001 tundra. its pretty easy to remove the gauge cluster and the clear shield. To start viewing messages. select the forum that you want to visit from the selection below.
You Can Clean The Lens Without Completely Disassembling It.
Lightly mist it onto a plush towel and lightly wipe at the surface in one movement. But if you must. make sure you use lens or screen cleaner that is safe on plastic or poly and soft lint free towel the (best ones are made for navigation screens). If theyre just dusty. not scratched yet. go with waterless wash.