How To Change Gauge Cluster Needle Color. Place the gauge cluster face down on a scratch resistant surface and use a phillips screwdriver to undo the screw on the back in the top. 26 gauge stranded wire in black and red color;
FORD FOCUS / Transit / Instrument Cluster DASH SPEEDO from picclick.co.uk
Then carefully unhook the four clips on the top. If you would like a color pm me your address and i will send you a square. Place the gauge cluster face down on a scratch resistant surface and use a phillips screwdriver to undo the screw on the back in the top.
Source: picclick.co.uk
If playback doesnt begin shortly. try. Its way too much work and risks damaging a lot of stuff.
Source: picclick.co.uk
Set the clear lens aside where it won’t get damaged. The needels themselves are colored plastic.
Source: picclick.com.au
How to change your gauge needles color. Sorry. its the way it works for the most part.
Source: autoline.be
How to change your gauge needles color. Plug and play twist on from the back of the cluster on the 2nd gens it these:
revtronic.com
Its way too much work and risks damaging a lot of stuff. This should be done gently as (a) you might need the led at a later date. (b) you dont really want to damage that board.
Source: kc-poitras.com
Okay. so here we are with the cluster that we are going to modify: Set the clear lens aside where it won’t get damaged.
I Used A Light Purple On Mine.
Will look like this when done.but what ever color bulbs you installed. I went to my local dj store and got gels that they use for the par can lights. Sorry. its the way it works for the most part.
Then Take Your Cutter And Cut Around The Two Openings For The Odometers.
They gave me 18 colors for 5 bucks. Set the clear lens aside where it won’t get damaged. Upgrade to an 04+ cluster.
How To Change Your Gauge Needles Color.
I know people that have used a highlighter or translucent paint to change the needle color. The issue with changing the gauges is that theyll look out of place unless you do the hvac. radio and other instruments/controls too. After your needles are assymbled. then match up with the length of the factory needle heads and take the extra off the 95 needles.
You Can Pick The Colors You Want For Park. Reverse. Drive. Etc To Be With A Colored Led Bulb.
This should be done gently as (a) you might need the led at a later date. (b) you dont really want to damage that board. 26 gauge stranded wire in black and red color; Then carefully unhook the four clips on the top.
Do Not Gouge The Plastic.
Using the soldering iron. heat the solder on one side of the led. whilst the solder is melted use the jewelers screwdriver to lift the led up at the same end. Cut out a round donut shape to place under the needle to turn it what color that you want it to be. The guy lampoon was talking about used a needle from another car it was the malibu i believe you would need to take apart the cluster and get the needles otherwise they would always be read no matter what led you put in there