12 Gauge 690 Round Ball Loads

12 Gauge 690 Round Ball Loads. Place rb on felt to gauge where to trim petals. It seems tat.690 balls with.020 patching is the norm.

Ammo 12 GA Rubber Shotshells 15 Ball 25s outthere24shop.co.za

Longbow stated that no wad and only felt wads or cards will leak and reduce fps and consistency. After while youll just trim all the wads while watching tv. So i am guessing the.690 ball with a thick patch would work just fine.

Foster VS round ball 12 gauge slugs Reloading andSource: forum.saiga-12.com

Uote=groovy mike;1083740]anybody ever load.69 roundballs in 12 gauge shells? They drop at.686 from the lee mold.

50 rds. 12 gauge 2 3/4 2 Round ball Shotgun Ammosportsmansguide.com

Most 12 gauges measure.729 inner bore diameter. What i settled on was a.690 round ball since that mould was easily obtainable from lee. and two 20 thousandths patches to make that fairly tight patch/ball combo.

.690 Round ball loads. Help!Source: castboolits.gunloads.com

Many experts are going back to them for their short range loads. So i am guessing the.690 ball with a thick patch would work just fine.

50 rds. 12 gauge 2 3/4 2 Round ball Shotgun Ammosportsmansguide.com

I want to try shooting patched round balls through it. Just loaded some 12 gauge round ball loads.

5 Rounds of Bulk 12ga Ammo by Federal 1 ounce Rifled Slugbulkammo.com

What i settled on was a.690 round ball since that mould was easily obtainable from lee. and two 20 thousandths patches to make that fairly tight patch/ball combo. Most 12 gauges measure.729 inner bore diameter.

12 ga. .690 Round Ballafricahunting.com

I used a 5/8 grade 8 nut. and opened up the hole. To duplicate that load in his side by side 12 gauge percussion muzzle loader he loads it with 75.0 grains (2 3/4 drams) of black powder and 1 1/8 ounces of number 8 shot.

Trim Petals To Just Behind The Widest Part Of The Rb.

The other day. i found my notes on loading.690 round balls as slugs for 12 gauge. 12 gauge 690 round ball loads. This mould casts a perfect hollowbase slugs which do not require rifling.

Place Rb On Felt To Gauge Where To Trim Petals.

But it seems i could load this up with felt only in a pinch. .710 round ball. for.72 musket 12 gauge shotgun. blued steel. with sprue nipper handles : Discussion starter · #1 · sep 29. 2015.

I Did Not Expect Stellar Accuracy. Which Was A Good Thing Cause It Aint There!!

.690 rb in win aa12 wad. cut the petalsof the wad until they are halfway up the ball. Reply | edit | del re: Making.690 round balls work in 12 ga.

I Have Never Shot One With A Round Ball That Has Ever Had A Good Thing To Say About It.

I want to try shooting patched round balls through it. They feel like stout.375hh 300 grainers. Many experts are going back to them for their short range loads.

That Is In A 3 Mag Though. You Might Only Get One In A 2 1/2 Or 2 3/4 Case.

I used a 5/8 grade 8 nut. and opened up the hole. They hit a ton. and shoot from a. $40.99 similar to the antique possibles bag style ball mold used.